SNAP-RING HEAD ASSEMBLY

SNAP-RING HEAD ASSEMBLY

The Model A-4 Multiple Point Rod Extensometer with Snap-Ring Anchors is quickly and easily installed in boreholes in hard or competent rock. Anchors are pushed to the required depth on the end of setting rods and then a cord is pulled to remove the locking pin which allows two retaining rings on each anchor to snap outward and grip the borehole. Up to eight anchors can be installed, at various depths, in a 76 mm diameter borehole. Particularly useful in upward directed boreholes.

  • Request Quote:

    • $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • 0 $
    • $
    • $
    • 0 $
    • 0 $
    • 0 $
    • $
    • $
    • $

    Galvanized aircraft cable, 1/16 in

    • $

    Replacement (oversize) snap-rings for snap-ring anchors. Specify borehole size.

    • $

    Stainless steel snap-ring type borehole anchor (for temperature up to 200°C). Specify borehole size.

    • $
Specifications
Downloads

The system features adjustable gage lengths, rapid and simple installation/removal and high accuracy using a variety of transducers including Vibrating Wire and DCDT’s. Adapters for use in square tubing are also available.

specifications

Standard Range up to 300 mm nominal
Least Reading 0.025 mm
Borehole Diameter 38 mm to 76 mm
Maximum Length 50 m

downloads